Accuracy Systems' location is not a retail/store front. It is a machine shop with dangerous machines running. For your safety we do not accept walk-ins. PLEASE CALL FOR AN APPOINTMENT IF YOU ARE GOING TO VISIT. THANKS.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE!
742 / 7400 / 750 Free Floating Forearms
UNEQUALED ACCURACY IMPROVEMENT PERIOD!
Free Floats the barrel to remove pressure points which effect the barrel's harmonics.
These forearms will close your group size in most rifles drastically, Assuming that your barrel is not shot out.
Machined from 6061 Aluminum Alloy then hard anodized for superior rigidity unlike cheap plastic forearms.
These forearms allow for the most important part of the rifle, which is to mount the optics securely to a solid base.
We have redesigned and added from our previous model more lightning cuts which reduce weight for a better balanced rifle.
We have added more attachment points to the bottom and both sides of the forearm for accessory rails, sling swivel studs and bi pods.
Comes in a standard Overall length of 15.5" that is long enough to cover the factory gas block.
Top rail's come in two lengths which are integrated and machined into the forearm as one complete part for strength.
The Full top rail is 15.5" for those who need more room for night vision scopes, Flip up open sights and more.
The Half top rail is 7 3/8" long and sets 1/2" higher than the stepped down portion of the forearm's top. This allow's for more clearance for the front objective of scopes.
Comes with two swivel studs. One for the Bi-pod and one for the sling to attach to.
Includes: One Allen wrench, 4 mounting screws and one rear trim screw for elevation adjustments.
Easy 10 Minute Installation!
**NOTE: The model 742 will require some minor fitting. It is very easy for the do it yourself type of person. Order Screw and Tap kit below. $16.99
Our product will not fix a worn out, shot out, out of spec bore dimension or defective barrel. There are times when a new barrel replacement would be warranted. See our 7400 & 750 barrel replacements
6/5/2014
I love your free float forearm product it has totally changed the look of my rifle.It shoots great and I really like the look of it now.
I still have a few things I want to do it and would like to know what you think about it now. I have attached a few pictures of it now.
Again thanks for a great product. joker28970@yahoo.com
Hello,
I installed your free floating forearm on my Remington 750, and I am very pleased with the results. I had previously brought it to my local gunsmith, who sighted it in getting 1⅞ inch groups.
I had to take the scope off to install the forearm. I then brought it back to the same gunsmith, who this time achieved 1¼ groups. That pretty much says it all. Thank you for a fine product and proven results.
Sincerely,
Gaines Johnston VGJ5@aol.com
6/30/2011
Hello all at Accuracy Inc,
Thank you all so much for producing such an amazing product. I was a little skeptical about the price of the for-end, but when I received it and looked it over I was instantly happy with my purchase. Tight tolerances and generous wall thickness in the for-end was something I wasn't expecting. Although it is much heavier than I expected - it is definitely worth the extra weight for the rigidity it offers. It fit my rifle perfectly with no slop or play whatsoever.
Before your product, my rem 750 (.30-06) was set up with a Bushnell Elite 3200 3-9x . From bench rest at 9X with sandbags and Remington core lokt 150gr ammo I was printing a 12 inch group (4 - 3 shot groups) that looked like a 12g at 100yds. Although I was extremely disappointed ( and wondering if I should throw the 750 into a lake) I tried again with Hornady Superformance 165gr. With simply the ammo change I was shooting a 4 inch group at 100yds - however this was still nothing to brag about in any way. I was losing faith in this rifle.
After searching the internet I discovered your for-end replacement (we have nothing of this sort in Ontario). After ordering it I decided to also mount a Vortex Strikefire red dot and a BlackHawk Recoil dampening pistol grip stock to the 750 as well.
After installing everything I headed to the range. I wasn't hoping for anything amazing - I had decided to make this into a bush gun for 100yds and under (hence the red dot)
Just for fun I fired 6 rounds at 100 yds using a 2X doubler on the red dot. I couldn't believe it when I approached the target - all six rounds were in a 2.5inch spread.
This instantly made my purchase worth while. It was disturbing to me that now my rifle was more accurate with a red dot than it was with a 9x scope and the old for-end. I can only assume that the new for-end coupled with a decent scope would perform 1 MOA without strain. I was actually thinking of getting rid of this gun before I found your product - it was not accurate at all. Semi auto is no advantage if they are spraying into the bush. Now this rifle seems like a new gun altogether - fun to shoot and as accurate as I need it to be.
Thanks again for such an excellent product.
Regards,
Ryan C
Ontario
Canada
3/30/2011
To the Staff at Accuracy System
I just received my Vented full rail system for my Remington 7400. I couldn't be more happier with the performance and results..My gun looks like a different rifle all together..I am very please with my purchase and i will be doing business with your company again in the near future..I have included a few pics to show you what my rifle looks like now ..Thank you again for making such an incredible product.
Regards
K Lewis
3/30/2011
This has all been taken care of. I received a ½ rail free float forearm from you toward the end of January. I must say I couldn't be happier with your product. The install was easy and the results, even with the factory barrel, have been great.
Looking at the pictures on your web site gave me a couple of ideas of my own. I had a spare Mesa Tactical High Tube adapter for my 870 laying around and put it on my 7400 along with a CAA adjustable butt stock. I'm quite pleased with the result but I am going to swap out the high tube setup with a low tube adapter so I can mount an adjustable cheek piece on the butt stock. I've attached a couple of pictures so you can see what I've done.
Again, you have a fantastic product and it was a pleasure doing business with you.
Al Abney
Subj: PIc of our build 7400
Hi, this is our Remington 7400 30-06, it has your ½ rail forearm and the new ATI butt stock with pad. Scope is mounted with 10 rd. mag. It looks great and shoots great. Hog hunting in Texas this week end. Thank you for your help
Bill Clanahan bill@tfecompany.com
PRICES SUBJECT TO CHANGE WITH OUT NOTICE!
Thursday, November 21, 05:31:20 AM Mountain Time
Accuracy Systems' location is not a retail/store front. It is a machine shop with dangerous machines running. For your safety we do not accept walk-ins. PLEASE CALL FOR AN APPOINTMENT IF YOU ARE GOING TO VISIT. THANKS.
Hours of operation are Monday thru Thursday 8:30 AM to 4:30 PM, Friday 8:00 AM to 12:00 PM Mountain Time Zone
(Closed Saturday & Sunday)
All prices stated in this web site are subject to change without notice.
